Engineering Technology: Assoc. degree -Machining for Mechanical Engineering Tech
Diablo Valley College · Pleasant Hill, CA
- Cost
- $4,972
- Length
- 64 weeks
- Working 6 months later
- Not reported
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
No outcomes reported for this program
About a third of California programs report nothing. That is a fact about the program's reporting, not evidence that it works or does not.
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Trains for more than one job. The outlook shown is the weakest of them.
No regional figures for this program's city
Pleasant Hill is not one of the metropolitan or rural areas California names when it publishes wages and openings. A neighbouring area's figures would look exactly like a correct answer, so none are shown and the statewide figures stand alone. About half of California's programs are in this position.
Mechanical Engineers
Job ads may call this: Test Engineer · Design Engineer · Product Engineer · Project Engineer
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Read and interpret blueprints, technical drawings, schematics, or computer-generated reports.
- Research, design, evaluate, install, operate, or maintain mechanical products, equipment, systems or processes to meet requirements.
- Specify system components or direct modification of products to ensure conformance with engineering design, performance specifications, or environmental regulations.
- Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information.
- Design integrated mechanical or alternative systems, such as mechanical cooling systems with natural ventilation systems, to improve energy efficiency.
- Typical pay in California
- $134,564per year
- Projected openings
- 20,280
- Projected change
- +11.5%
- Usually needs
- Bachelor's degree
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: Four-year degree — 57% of the people doing this work.
California says this job usually needs: Bachelor's degree. 18% of the people doing it went less far than that.
- No high school diploma
- 0.7%
- High school diploma
- 4%
- Started college, no degree
- 6%
- Two-year degree
- 7%
- Four-year degree
- 57%
- Master's degree
- 22%
- Doctorate or professional degree
- 4%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Industrial Engineering Technologists and Technicians
Pay, hiring, and what people studied
Job ads may call this: Quality Technician · Service Technician · Engineering Technician · Business Process Analyst
- Compile and evaluate statistical data to determine and maintain quality and reliability of products.
- Test selected products at specified stages in the production process for performance characteristics or adherence to specifications.
- Study time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
Show 3 more things this job involves
- Verify that equipment is being operated and maintained according to quality assurance standards by observing worker performance.
- Evaluate industrial operations for compliance with permits or regulations related to the generation, storage, treatment, transportation, or disposal of hazardous materials or waste.
- Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
- Typical pay in California
- $81,283per year
- Projected openings
- 5,290
- Projected change
- +7%
- Usually needs
- Associate's degree
Getting in
- Experience needed first
- None
- Training after you are hired
- None
No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.
What people in this job actually studied
Most common: Started college, no degree — 28% of the people doing this work.
California says this job usually needs: Associate's degree. 57% of the people doing it went less far than that.
- No high school diploma
- 4%
- High school diploma
- 25%
- Started college, no degree
- 28%
- Two-year degree
- 19%
- Four-year degree
- 19%
- Master's degree
- 4%
- Doctorate or professional degree
- 0.9%
Industrial Machinery Mechanics
Pay, hiring, and what people studied
Job ads may call this: Mechanic · Loom Fixer · Overhauler · Loom Technician
- Repair or maintain the operating condition of industrial production or processing machinery or equipment.
- Repair or replace broken or malfunctioning components of machinery or equipment.
- Clean, lubricate, or adjust parts, equipment, or machinery.
- Disassemble machinery or equipment to remove parts and make repairs.
- Reassemble equipment after completion of inspections, testing, or repairs.
- Typical pay in California
- $76,504per year
- Projected openings
- 28,510
- Projected change
- +13.8%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- More than a year
New hires are trained on the job for more than a year after they start. The classroom part is the beginning of this work, not the whole of it.
What people in this job actually studied
Most common: High school diploma — 40% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 9% of the people doing it went less far than that.
- No high school diploma
- 9%
- High school diploma
- 40%
- Started college, no degree
- 26%
- Two-year degree
- 18%
- Four-year degree
- 6%
- Master's degree
- 1%
- Doctorate or professional degree
- 0.2%
Program details
This is a hybrid or blended program providing both in-person and online instruction.
The associate in science degree in machining for mechanical engineering technology is offered to prepare students with the required aptitude and skills to enter the workforce as entry level machinists among other occupations. The program prepares individuals to apply learned principles to the design, development and operational evaluation of physical systems used in manufacturing and end-product systems used for specific uses including machine tools- jigs, lathes, mills, drill presses, precision measuring- and other manufacturing equipment; stationary power units and appliances, engines, housings and containers, hydraulic and electric systems for controlling movement and the integration of computers and other operating systems. Additionally, students will be introduced to the concepts of computer numerical control (CNC) machines and 3 D (additive) manufacturing processes, geometric dimension and tolerance (GD&T) and modern technical drawing (CAD) techniques.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
A comprehensive center is where all the required partner programs can be reached; an affiliate site offers some of them. California's Employment Development Department directs people to CareerOneStop's finder to locate one. Contacting a center before traveling is worth it — the state notes that its own staff are not physically present at every location.
The rule: 20 CFR 678.305 — What is a comprehensive one-stop center? · 20 CFR 678.310 — What is an affiliated site? · California EDD — Office Locator
Concord America`s Job Center of California / East Bay WorksComprehensive center
Phone: 925-671-4500
4071 Port Chicago HighwaySuite 250Concord, CA 94520about 5.1 miles away
Hours: M-F 8:30 am-5:00 pm
Has a veterans' representative
East Oakland Neighborhood Career CenterAffiliate site
Phone: 510-568-8349
7200 Bancroft AvenueSuite 140Oakland, CA 94605about 13.9 miles away
Hours: Monday - Thursday 8:30 a.m.-4 p.m., Friday 9 a.m.-4 p.m.
The Unity Council Career & Resource CenterAffiliate site
Phone: 510-535-6101
1900 Fruitvale AvenueOakland, CA 94601about 14.2 miles away
Hours: Monday - Friday 9:00am-5:00pm
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →