CNC Machinist
De Anza College, Occupational Training Institute · Cupertino, CA
- Cost
- $5,269
- Length
- 36 weeks
- Working 6 months later
- Not reported
Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.
What happened to people who took this
- People enrolled
- 3,056
- Finished the program
- 82%Based on 1,965 people
- Working 6 months later
- 12%
- Earnings in one quarter after
- Not reported
The jobs this trains for
This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.
Shrinking -11.5%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.
Trains for more than one job. The outlook shown is the weakest of them.
No regional figures for this program's city
Cupertino is not one of the metropolitan or rural areas California names when it publishes wages and openings. A neighbouring area's figures would look exactly like a correct answer, so none are shown and the statewide figures stand alone. About half of California's programs are in this position.
Computer Numerically Controlled Tool Operators
Job ads may call this: Machine Operator · Machine Set Up Operator · CNC Operator (Computer Numerical Control Operator) · CNC Machinist (Computer Numerical Control Machinist)
Some of what people in this job do. The Department rates how important each one is, and they appear in that order.
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures.
- Set up and operate computer-controlled machines or robots to perform one or more machine functions on metal or plastic workpieces.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Review program specifications or blueprints to determine and set machine operations and sequencing, finished workpiece dimensions, or numerical control sequences.
Show 2 more things this job involves
- Stop machines to remove finished workpieces or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration, and adjust machines to compensate for problems.
- Typical pay in California
- $57,799per year
- Projected openings
- 16,320
- Projected change
- -11.5%
- Usually needs
- High school diploma or equivalent
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: High school diploma or equivalent. 10% of the people doing it went less far than that.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.
Computer Numerically Controlled Tool Programmers
Pay, hiring, and what people studied
Job ads may call this: Programmer · Numerical Control Programmer (NC Programmer) · CNC Tech (Computer Numerical Control Technician) · CAD Programmer (Computer-Aided Design Programmer)
- Determine the sequence of machine operations, and select the proper cutting tools needed to machine workpieces into the desired shapes.
- Analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and design data to calculate dimensions, tool selection, machine speeds, and feed rates.
- Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications.
- Write programs in the language of a machine's controller and store programs on media, such as punch tapes, magnetic tapes, or disks.
Show 2 more things this job involves
- Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures.
- Enter computer commands to store or retrieve parts patterns, graphic displays, or programs that transfer data to other media.
- Typical pay in California
- $83,963per year
- Projected openings
- 3,190
- Projected change
- +10%
- Usually needs
- Postsecondary non-degree award
Getting in
- Experience needed first
- None
- Training after you are hired
- 1 to 12 months
What people in this job actually studied
Most common: High school diploma — 41% of the people doing this work.
California says this job usually needs: Postsecondary non-degree award. That is not one of the steps below, so there is no way to count how many people meet it.
- No high school diploma
- 10%
- High school diploma
- 41%
- Started college, no degree
- 26%
- Two-year degree
- 12%
- Four-year degree
- 9%
- Master's degree
- 0.9%
- Doctorate or professional degree
- 0.7%
It is also measured on a different scale from “Usually needs” above, so the two cannot be subtracted from one another.
Program details
This is a hybrid or blended program providing both in-person and online instruction.
De Anza has one of the most diversified collections of machine tools of any college program in the West. The curriculum includes many lecture/lab classes that will provide you with hands-on experience using computers and machine tools to perform many manufacturing processes. Classes are smallabout 20-24 students, so individual help is readily available.A program that prepares individuals to apply technical knowledge and skills to operate computer numerically controlled (CNC) machine tools, such as lathes, mills, precision measuring tools, and related attachments and accessories, to perform machining functions, such as cutting, drilling, shaping, and finishing products and component parts. Includes instruction in CNC terminology, setup, programming, operations, and troubleshooting; blueprint reading; machining; lathe and mill operations; technical mathematics; computer literacy; CAD/CAM systems; shop and safety practices; equipment capabilities; regulations and laws.
Someone else may be able to pay for this
This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.
The place to ask is an America's Job Center of California
A comprehensive center is where all the required partner programs can be reached; an affiliate site offers some of them. California's Employment Development Department directs people to CareerOneStop's finder to locate one. Contacting a center before traveling is worth it — the state notes that its own staff are not physically present at every location.
The rule: 20 CFR 678.305 — What is a comprehensive one-stop center? · 20 CFR 678.310 — What is an affiliated site? · California EDD — Office Locator
NOVAworksComprehensive center
Phone: 408-730-7232
456 W. Olive AvenueSunnyvale City HallSunnyvale, CA 94086about 5.7 miles away
Hours: Mon - Fri 8:00 am - 5:00 pm
North San Jose America`s Job Center of CaliforniaAffiliate site
Phone: 408-216-6200
1901 Zanker RoadSan Jose, CA 95112about 11.1 miles away
Hours: Monday-Friday 8am-5pm
Has a veterans' representative
San Jose Job CenterComprehensive center
Phone: 408-794-1101
1608 Las Plumas AvenueWork2Future-Silicon Workforce Development BoardSan Jose, CA 95133about 12.9 miles away
Hours: Monday - Friday 8a-5p
Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.
Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List
How this gets paid for, and what to ask →
Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.
The rules cited here, and the state and federal sites linked to, are published in English.
How this site gets its figures, and what they do not tell you →