Not a California state website. An independent project built from public data.
Camino · CA

California training programs, and what happened to the people who took them

Español (inicio)

Back to search

IC Layout Design

Silicon Valley Polytechnic Institute · San Jose, CA

Cost
$3,150
Length
12 weeks
Working 6 months later
100%

Program names, program descriptions and occupation titles appear here in English, because that is the only language the federal and state records publish them in. Everything else on this page is translated.

What happened to people who took this

People enrolled
15

Small group — treat with caution

Finished the program
100%Based on 6 peopleTypical California program: 85% of 1,951 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
Working 6 months later
100%Typical California program: 69% of 1,690 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.
Earnings in one quarter after
$16,800A single quarter of earnings, roughly three months, not a yearly salary. Do not compare it directly with the yearly pay shown for the occupation.Typical California program: $10,900 of 1,339 reportingThat median pools every California program that reported this measure, whatever its length, credential, or field, and leaves out the ones that reported nothing. It is a reference point, not a rating of this program.

The job this trains for

This describes the jobs people do, not the classes this program teaches. It comes from the U.S. Department of Labor, which asks people already doing the work. The Department publishes it in English only, so the job names and the sentences below stay in English on this page.

Shrinking -10%
California projects this job will shrink over the next ten years. Fewer openings may mean a harder search.

Where California publishes a separate figure for San Jose-Sunnyvale-Santa Clara MSA (San Benito and Santa Clara Counties), it appears beneath the statewide one. Statewide stays the headline: people who train here do not necessarily work here.

Electrical and Electronics Drafters

Job ads may call this: Drafter · Designer · Layout Designer · Staking Engineer

Some of what people in this job do. The Department rates how important each one is, and they appear in that order.

  • Draft detail and assembly drawings of design components, circuitry or printed circuit boards, using computer-assisted equipment or standard drafting techniques and devices.
  • Draft working drawings, wiring diagrams, wiring connection specifications, or cross-sections of underground cables, as required for instructions to installation crew.
  • Assemble documentation packages and produce drawing sets to be checked by an engineer or an architect.
  • Review completed construction drawings and cost estimates for accuracy and conformity to standards and regulations.
Show 3 more things this job involves
  • Consult with engineers to discuss or interpret design concepts, or determine requirements of detailed working drawings.
  • Confer with engineering staff and other personnel to resolve problems.
  • Measure factors that affect installation and arrangement of equipment, such as distances to be spanned by wire and cable.
Typical pay in California
$80,502per yearSan Jose-Sunnyvale-Santa Clara MSA: $104,464
Projected openings
2,120San Jose-Sunnyvale-Santa Clara MSA: 530
Projected change
-10%
Usually needs
Associate's degree

Getting in

Experience needed first
None
Training after you are hired
None

No earlier job experience is expected, and new hires are not put through a long training period. For work like this, a program is usually the way in.

These are the federal government's answers for the occupation, not rules this provider sets. California publishes the same two answers for every one of these jobs.

What people in this job actually studied

Most common: Two-year degree — 35% of the people doing this work.

California says this job usually needs: Associate's degree. 40% of the people doing it went less far than that.

No high school diploma
2%
High school diploma
12%
Started college, no degree
26%
Two-year degree
35%
Four-year degree
20%
Master's degree
4%
Doctorate or professional degree
0.9%

This counts people already doing this job, across the whole United States. Every other figure on this page is California's, and the federal government publishes no state version of this one. It is what people happen to have, not a rule about who gets hired. A small row does not mean you would be turned away, and a large one is not a promise of a job.

Program details

This program provides in-person instruction only.

One of the best training courses available in industry, this course introduces the students to the process, tools and methodology of IC Layout Design using the latest Design Automation tools. The course provides the students with the insight into the exciting field of semiconductor technology and electronic devices, and trains them in IC layout techniques for a variety of application in Digital, Analog, and RFIC. This training program prepares students for entry-level positions in the industry.

Someone else may be able to pay for this

This program was on California's Eligible Training Provider List when the state last reported it to the U.S. Department of Labor (2026-08-04). Programs on that list can be paid for through an Individual Training Account. Listings are renewed periodically and can lapse, so a program listed when the state last reported may not be listed today. Ask before you rely on it.

The place to ask is an America's Job Center of California

A comprehensive center is where all the required partner programs can be reached; an affiliate site offers some of them. California's Employment Development Department directs people to CareerOneStop's finder to locate one. Contacting a center before traveling is worth it — the state notes that its own staff are not physically present at every location.

The rule: 20 CFR 678.305 — What is a comprehensive one-stop center? · 20 CFR 678.310 — What is an affiliated site? · California EDD — Office Locator

  • San Jose Job CenterComprehensive center

    Phone: 408-794-1101

    1608 Las Plumas AvenueWork2Future-Silicon Workforce Development BoardSan Jose, CA 95133about 2.2 miles away

    Hours: Monday - Friday 8a-5p

  • North San Jose America`s Job Center of CaliforniaAffiliate site

    Phone: 408-216-6200

    1901 Zanker RoadSan Jose, CA 95112about 2.6 miles away

    Hours: Monday-Friday 8am-5pm

    Has a veterans' representative

  • NOVAworksComprehensive center

    Phone: 408-730-7232

    456 W. Olive AvenueSunnyvale City HallSunnyvale, CA 94086about 7.9 miles away

    Hours: Mon - Fri 8:00 am - 5:00 pm

Distances are straight-line, so the drive is longer. Call before you travel: opening hours here are as the federal directory published them, and the state notes its own staff are not present at every location.

Find a center anywhere in California, and check what is on the list today:
CareerOneStop — American Job Center Finder (U.S. DOL) · California EDD — Office Locator · California EDD — Eligible Training Provider List

How this gets paid for, and what to ask

Whether a person can have a program paid for is decided by their local workforce development board and the America's Job Center staff who interview them — not by this site, and not by the training provider. California has 45 local workforce development areas and each sets its own policies, so the answer can differ between two people in neighboring counties. Nothing here is a promise of funding or a determination of eligibility.

The rules cited here, and the state and federal sites linked to, are published in English.

How this site gets its figures, and what they do not tell you